LT1725CGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~100°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1725 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 9.7V~22V |
| Control Features | Enable, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 90kHz~115kHz |
| Rise Time | 30ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Nominal Input Voltage | 15.1V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 90 % |
| Height | 1.5mm |
| Length | 4.98mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1725CGN#PBF Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 9.7V~22V voltage is supplied to the dc control and used for operating it. A 0°C~100°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 90kHz~115kHz . A generalization of dc dc regulator can be made using Surface Mount. Enable, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. An array of 16 terminations of dc switching. DC switcher's voltage input of 14V. In addition to "LT1725", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. normally, the dc dc regulator's output current is 5A, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 90 % to ensure reliability during power-up and power-down. A frequency of 100kHz is set for the switching controller. You can set the input voltage to 15.1V for nominal working status.
LT1725CGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 90kHz~115kHz
Enable, Soft Start
Max Duty Cycle: 90 %
Frequency: 100kHz
LT1725CGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1725CGN#PBF DC to DC converter applications.
- Energy management systems
- Wind power
- Large fire protection systems
- Communication system
- Shearing machines
- PSRR circuits
- Hydro power
- Network technology
- Direct power supply system
- Scientific testing
