LT1737IGN#PBF
| Parameters | |
|---|---|
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12.1V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 14V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 4.1V~20V |
| Quiescent Current | 10mA |
| Control Features | Enable, Soft Start |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 90kHz~115kHz |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 22V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 90% |
| Length | 4.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1737 |
LT1737IGN#PBF Overview
With its 16-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 4.1V~20V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at 90kHz~115kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. Various 16 terminations. The DC switcher's nominal voltage is 14V. In addition to "LT1737", there are other relevant dc to dc converter ics you can find. There are a total of 16 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. The test statistics indicate that DC regulator outputs a voltage of 12.1V. You should note down the dc dc regulator's usual output current of 100mA when you start a project. There is 100kHz frequency setting on the switching controller. During dormancy, the dc switching uses 10mA. For nominal working status, the input voltage can be set as 22V.
LT1737IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 90kHz~115kHz
Enable, Soft Start
Frequency: 100kHz
LT1737IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1737IGN#PBF DC to DC converter applications.
- Telecommunications equipment
- Computed tomography (CT)
- Elevator lighting
- Serial communication converter
- Ball screw pair
- Production lines
- Electric heating, lighting
- Gear/thread machining machines
- Communication system
- Series voltage regulation circuits
