LT1783IS5#TRMPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | TSOT |
| Number of Pins | 5 |
| Packaging | Cut Tape |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2.2V |
| Operating Supply Current | 230μA |
| Max Supply Current | 300μA |
| Slew Rate | 0.45 V/μs |
| Common Mode Rejection Ratio | 68 dB |
| Current - Input Bias | 40nA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 800μV |
| Bandwidth | 1.3MHz |
| Gain Bandwidth Product | 1.25MHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.25V |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 1.25MHz |
| Number of Amplifiers | 1 |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1783IS5#TRMPBF Overview
A TSOT case is used to package the op amp. There is a Cut Tape case that is delivered with the instrumentation amplifiers. There are 5 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 800μV. It is possible to operate this buffer amplifier from a supply current of 230μA . Voltage gain should remain at 123.52dB. This op amp ic has 1 circuits. 1 channels are available on the instrumentation amplifier. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. No temperature greater than 85°C should be used. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V. Under 18V is the minimum supply voltage for this electric component. Keeping the linear amplifier's supply voltage above 2.2V is recommended. You should conduct this electronic component under the dual supply voltage of 9V. A total of 1 instrumentation amplifiers are present on the device.
LT1783IS5#TRMPBF Features
123.52dB voltage gain
LT1783IS5#TRMPBF Applications
There are a lot of Analog Devices, Inc. LT1783IS5#TRMPBF Instrumentational OP Amps applications.
- Vehicle electronics
- RF cable systems
- Micro signal measurement
- Portable media players
- Home audio systems
- Video amplifiers
- Gaming industry
- Band-pass filter
- Non-polarized electrodes
- Commercial audio systems
