LT1784CS5#TRPBF

1 Channels 27mA per Channel 250nA 60 dB Instrumentational OP Amps SOT-23-5

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1784CS5#TRPBF
Package: SOT-23-5
Datasheet: PDF
Stock: 808
Description: 1 Channels 27mA per Channel 250nA 60 dB Instrumentational OP Amps SOT-23-5(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Package / Case	SOT-23-5
Number of Pins	5
Packaging	Tape & Reel (TR)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	1
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	18V
Min Supply Voltage	2V
Operating Supply Current	750μA
Slew Rate	2.1 V/μs
Common Mode Rejection Ratio	60 dB
Current - Input Bias	250nA
Output Current per Channel	27mA
Input Offset Voltage (Vos)	3.5mV
Gain Bandwidth Product	2.5MHz
Voltage Gain	120dB
Power Supply Rejection Ratio (PSRR)	90dB
Max Dual Supply Voltage	9V
Min Dual Supply Voltage	1.25V
Nominal Gain Bandwidth Product	2.5MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT1784CS5#TRPBF Overview

In the package, you will find a SOT-23-5-case to contain the op amp ic. A Tape & Reel (TR) case is used for delivering the op amp. 5 pins are included on the operational amplifiers. The input offset voltage is 3.5mV. Using a supply current of 750μA , this buffer op amp will be able to operate. The voltage gain should stay at 120dB. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. You should only use op amp buffer at temperatures that are no higher than 70°C. The total number of elements in this buffer amplifier is 1. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 18V. It is advised to keep the op amp's supply voltage higher than 2V. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 9V.