LT1784CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1784 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 750μA |
| Supply Current-Max | 0.975mA |
| Slew Rate | 2.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~18V ±1.25V~9V |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 2.6MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2600 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Voltage - Input Offset | 1.6mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Nominal Gain Bandwidth Product | 2.5MHz |
| Wideband | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1784CS6#TRMPBF Overview
There is a SOT-23-6 Thin, TSOT-23-6 case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. The number of terminations approaches 6. In this case, there are 6 pins on the board. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 6 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3.5mV. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . You can run this op amp ic on 750μA . Maintain 120dB as the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. This linear amplifier pack is based on the TAPE AND REEL axis. The Over-The-Top? stands for the buffer op amp's serial number.
LT1784CS6#TRMPBF Features
6 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LT1784CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1784CS6#TRMPBF Instrumentational OP Amps applications.
- High gain DC amplifier
- Strain gauges
- Comparator
- Medical imaging
- Gaming industry
- Addition operation circuits
- Portable electronic products powered by batteries
- Navigation
- Cinema or auditorium audio system
- Automatic control
