Parameters |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Package / Case |
SOIC |
Number of Pins |
8 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Operating Supply Voltage |
28V |
Number of Elements |
1 |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
60V |
Min Supply Voltage |
2.5V |
Operating Supply Current |
60μA |
Max Supply Current |
120μA |
Common Mode Rejection Ratio |
88 dB |
Output Current per Channel |
50μA |
Input Offset Voltage (Vos) |
75μV |
Bandwidth |
300 kHz |
Voltage Gain |
18.32dB |
Power Supply Rejection Ratio (PSRR) |
120dB |
Nominal Gain Bandwidth Product |
115 kHz |
Number of Amplifiers |
1 |
Height |
1.48mm |
Length |
5mm |
Width |
3.99mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LT1787HVCS8#PBF Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 75μV. As long as the supply current of the chip does not exceed 60μA, this op amp ic can operate. 18.32dB should be the voltage gain. On this buffer amplifier, there are 1 circuits. There are a total of 1 channels available on the op amps. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. Use op amps only at temperatures no higher than 70°C. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 28V. This electric component can work from a voltage of under 60V as far as supply voltage is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5V at all times. There are 1 amplifiers on it.
LT1787HVCS8#PBF Features
18.32dB voltage gain
LT1787HVCS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1787HVCS8#PBF Instrumentational OP Amps applications.
- Voltage regulation circuit
- Radiation thermometry transducers
- Test equipment
- Broadcasting
- Power generator
- Navigation
- Automatic control
- Measurements of Wheatstone bridge
- Hand-held batteries
- Precision measurement