LT1787HVIS8#TRPBF
| Parameters | |
|---|---|
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1787 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 60V |
| Power Supplies | 2.5/60V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 60μA |
| Amplifier Type | Current Sense |
| Voltage - Supply, Single/Dual (±) | 2.5V~60V ±1.25V~30V |
| Output Current per Channel | 50μA |
| Input Offset Voltage (Vos) | 75μV |
| Voltage Gain | 18.32dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Voltage - Input Offset | 40μV |
| Nominal Gain Bandwidth Product | 115 kHz |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
LT1787HVIS8#TRPBF Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the Current Sense type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Other Analog ICs buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Op amp rates 75μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 60μA volt supply current is needed for this linear amplifier to operate. It is a member of the 18.32dB's 18.32dB family. There is a rating of 1 for the operating supply voltage of the buffer op amp. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
LT1787HVIS8#TRPBF Features
8 Pins
supply voltage of 5V
18.32dB voltage gain
LT1787HVIS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1787HVIS8#TRPBF Instrumentational OP Amps applications.
- Wireless base stations
- Medical instruments
- Power transmission
- Weak signal detection
- Blood pressure sensors
- Hand-held batteries
- single/dual op amp sum and difference circuits
- Logarithmic operation circuits
- Multiplication circuits
- Band-pass filter
