LT1789CS8-10#PBF
| Parameters | |
|---|---|
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Number of Terminations | 8 |
| Resistance | 1.6GOhm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 15V |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.2V |
| Operating Supply Current | 85μA |
| Slew Rate | 0.062 V/μs |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 40nA |
| Output Current per Channel | 8.5mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 25 kHz |
| Gain Bandwidth Product | 25 kHz |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.1V |
| Nominal Gain Bandwidth Product | 60 kHz |
| Number of Amplifiers | 1 |
| Width | 3.899mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
LT1789CS8-10#PBF Overview
Packaged in a SOIC case, the buffer op amp is ready to use. The number of terminations is approaching the 8 mark. 8 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 3mV. Using an 85μA supply current, this operational amplifier ics can be operated. In total, there are 1 circuits on this buffer amplifier. As far as the device is concerned, buffer amplifier has 1 channels. To operate this buffer amplifier, the temperature must not be lower than 0°C. Instrumentation amplifier should only be used at temperatures up to 70°C. There is an operating supply voltage rating of 3 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 15V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 36V. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.2V, it is recommended to keep it higher. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. 1.6GOhm is the range in which the op amp resistance should lie. A total of 1 instrumentation amplifiers are present on the device.
LT1789CS8-10#PBF Features
Resistance of 1.6GOhm
LT1789CS8-10#PBF Applications
There are a lot of Analog Devices, Inc. LT1789CS8-10#PBF Instrumentational OP Amps applications.
- Television
- Computer workstations
- Switching amplifier
- Signal filtering
- Subtraction operation circuits
- Navigation
- Weighing systems
- Fast A/D and D/A converters
- Hand-held batteries
- Ultrasound transducers
