LT1791CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1791 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 5.5mA |
| Max Supply Current | 9mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 20mV |
| ESD Protection | Yes |
| Receive Delay-Max | 900 ns |
| Transmit Delay-Max | 2000 ns |
| Number of Receivers | 1 |
| Height | 1.5mm |
| Length | 8.74mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1791CS#PBF Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.75V~5.25V.At any one time, this electronic part can have up to 1/1 eligible receivers/drivers.IC receiver is designed for applications with a temperature of 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.14 terminations are integrated into this wide receiver for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.The base part number LT1791 identifies the product type, temperature, package, etc., so you can search for more variants by using it.14-pin driver IC with improved power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.It provided a 1-bit resolution capability with this ic receiver.There is a 5V input voltage supply that can be used to operate this transceiver module.There is a subcategory named Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.The module isolated transceiver contains 1 receivers.In the case of input current exceeding 9mA, this can transceiver may malfunction.
LT1791CS#PBF Features
Tube package
14 pin count
14 pins
5V power supply
LT1791CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1791CS#PBF Drivers/Receivers/Transceivers applications.
- Gigabit Ethernet
- Changeing the frequency from IF to RF
- Wireless HD Photography
- Shortwave receiver
- Aircraft positioning
- Switching system
- Ethernet circuitry
- Copper connection network
- Bridges
- TV signal transmission
