LT1793AIS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1793 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 4.2mA |
| Supply Current-Max | 5.4mA |
| Slew Rate | 3.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 83 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~20V |
| Input Offset Voltage (Vos) | 800μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3100 kHz |
| Voltage Gain | 133.06dB |
| Average Bias Current-Max (IIB) | 0.0024μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 4.2MHz |
| Input Offset Current-Max (IIO) | 0.0003μA |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1793AIS8#PBF Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a J-FET-type. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, buffer amplifier rates 800μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 4.2mA . There should be no change in the voltage gain at 133.06dB. This op amp contains 1 circuits. A total of 1 elements are present in this linear amplifier.
LT1793AIS8#PBF Features
8 Pins
supply voltage of 15V
133.06dB voltage gain
LT1793AIS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1793AIS8#PBF Instrumentational OP Amps applications.
- Blood pressure sensors
- Oscilloscopes
- Television broadcasting equipment
- Test equipment
- Multiplication circuits
- single/dual op amp sum and difference circuits
- Professional videography
- Medical imaging
- Mobile phone
- Industrial applications including automation
