LT1795CFE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1795 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 29mA |
| Supply Current-Max | 84mA |
| Slew Rate | 900V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 13mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 50000 kHz |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 65MHz |
| Wideband | NO |
| Power | YES |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1795CFE#PBF Overview
It is packaged in an 20-TSSOP (0.173, 4.40mm Width) Exposed Pad-case that protects the operational amplifiers from damage. An op amp ic of the Current Feedback type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. During the past two weeks, there have been close to 20 terminations. In this case, there are 20 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 20 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 13mV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. Using an 29mA supply current, this operational amplifier ics can be operated. A linear amplifier like this has 2 circuits on it.
LT1795CFE#PBF Features
20 Pins
supply voltage of 15V
LT1795CFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1795CFE#PBF Instrumentational OP Amps applications.
- Fission chambers
- Integrator circuits
- Information processing
- Communication
- Large motor controllers
- Wireless base stations
- High-frequency data acquisition systems
- Video computer boards
- single/dual op amp sum and difference circuits
- Active probe
