LT1795IFE#PBF
| Parameters | |
|---|---|
| Gain Bandwidth Product | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 50000 kHz |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Number of Drivers | 2 |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 65MHz |
| Wideband | NO |
| Power | YES |
| Height | 1.2mm |
| Length | 6.4mm |
| Width | 6.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1795 |
| Pin Count | 20 |
| Number of Circuits | 2 |
| Operating Supply Current | 29mA |
| Supply Current-Max | 84mA |
| Slew Rate | 900V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 62 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 13mV |
LT1795IFE#PBF Overview
The linear amplifier is packaged in a 20-TSSOP (0.173, 4.40mm Width) Exposed Pad case which makes it easy for the consumer to handle. This is a Current Feedback type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 20 mark. The total number of pins on linear amplifier is 20. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 20-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 13mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 29mA . On this buffer amplifier, there are 2 circuits.
LT1795IFE#PBF Features
20 Pins
supply voltage of 15V
LT1795IFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1795IFE#PBF Instrumentational OP Amps applications.
- Hand-held batteries
- Signal transformation
- Industrial applications including automation
- Subtraction operation circuits
- Switching amplifier
- Strain gauges
- Power generator
- Exponential operation circuits
- Information processing
- Portable docking station
