LT1797IS5#TRMPBF
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LT1797 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.4mA |
| Supply Current-Max | 3mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 64 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 11MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 10MHz |
| Wideband | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
LT1797IS5#TRMPBF Overview
The linear amplifier is packaged in a SOT-23-5 Thin, TSOT-23-5 case which makes it easy for the consumer to handle. An op amp of this type is a Buffer-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 5 terminations have been reported in the past few weeks. Linear amplifier has a total of 5 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 5-pin op amp ic is included in the package. Op amp rates 1.5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using a supply current of 1.4mA , this buffer op amp will be able to operate. You should keep the voltage gain at 120dB for the time being. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This linear amplifier has a total of 1 elements. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
LT1797IS5#TRMPBF Features
5 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
LT1797IS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1797IS5#TRMPBF Instrumentational OP Amps applications.
- E-book readers
- Displayers for aircraft and air transportation control systems
- Video data acquisition
- Cinema or auditorium audio system
- Weak signal detection
- High gain DC amplifier
- Communication device
- Radiation thermometry transducers
- Medical instruments
- Vehicle electronics
