LT1800IS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1800 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 1.8mA |
| Supply Current-Max | 4mA |
| Slew Rate | 23V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.3V~12.6V ±1.15V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 65000 kHz |
| Voltage Gain | 98.59dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 700μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 80MHz |
| Wideband | NO |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1800IS8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 350μV voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 1.8mA . There should be no change in the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1.
LT1800IS8#PBF Features
8 Pins
supply voltage of 5V
98.59dB voltage gain
Output Type: Rail-to-Rail
LT1800IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1800IS8#PBF Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Power control
- Strain gauges
- Ultrasound transducers
- Oscilloscopes
- single/dual op amp sum and difference circuits
- RF cable systems
- PDA
- Proportional counter tubes
- Fission chambers
