LT1801CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1801 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Operating Supply Current | 1.8mA |
| Max Supply Current | 4mA |
| Slew Rate | 25V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 25nA |
| Voltage - Supply, Single/Dual (±) | 2.3V~12.6V ±1.15V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 70000 kHz |
| Voltage Gain | 98.59dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Voltage - Input Offset | 75μV |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 80MHz |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1801CMS8#PBF Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 350μV. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureYou can run this op amp ic on 1.8mA . There should be no change in the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 3V.
LT1801CMS8#PBF Features
8 Pins
supply voltage of 5V
98.59dB voltage gain
Output Type: Rail-to-Rail
LT1801CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1801CMS8#PBF Instrumentational OP Amps applications.
- Scintillation detectors
- Video computer boards
- Image computer boards
- Portable media players
- Division circuits
- Subtraction operation circuits
- Power transmission
- Band-stop filter
- Signal amplification
- Polarized electrodes
