LT1801CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.6mA |
| Max Supply Current | 4mA |
| Slew Rate | 25 V/μs |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 1.5μA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 80MHz |
| Voltage Gain | 98.59dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.15V |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 80MHz |
| Number of Amplifiers | 2 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1801CS8#PBF Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. 8 pins are available on the instrumentation amplifier. Op amp ic rates 350μV for input offset voltage. This op amp can operate from a supply current at 1.6mA. Maintain 98.59dB as the voltage gain. The buffer amp consists of 2 circuits in total. 2 channels are available on the instrumentation amplifier. The temperature should not be lower than -40°C for operational amplifier ics to operate. No temperature greater than 85°C should be used. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 3V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. Keeping the linear amplifier's supply voltage above 2.3V is recommended. You should conduct this electronic component under the dual supply voltage of 6.3V. In total, there are 2 op amps on the device.
LT1801CS8#PBF Features
98.59dB voltage gain
LT1801CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1801CS8#PBF Instrumentational OP Amps applications.
- Image computer boards
- Voltage regulation circuit
- Micro signal measurement
- Signal operation
- Medical imaging
- PDA
- Television broadcasting equipment
- Automotive sensors
- Inverse/same-phase proportional circuit
- Television
