LT1802IS#PBF

50mA per Channel 400nA 85 dB Instrumentational OP Amps 2.25μA 2.3V~12.6V ±1.15V~6.3V LT1802 14 Pins 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Linear Technology/Analog Devices
Nocochips NO: 471-LT1802IS#PBF
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 800
Description: 50mA per Channel 400nA 85 dB Instrumentational OP Amps 2.25μA 2.3V~12.6V ±1.15V~6.3V LT1802 14 Pins 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2009
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	LT1802
Pin Count	14
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Elements	4
Operating Supply Current	1.8mA
Slew Rate	25V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	85 dB
Current - Input Bias	400nA
Voltage - Supply, Single/Dual (±)	2.3V~12.6V ±1.15V~6.3V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	350μV
Gain Bandwidth Product	70MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	65000 kHz
Voltage Gain	98.59dB
Average Bias Current-Max (IIB)	2.25μA
Power Supply Rejection Ratio (PSRR)	78dB
Supply Voltage Limit-Max	6.3V
Voltage - Input Offset	700μV
Neg Supply Voltage-Max (Vsup)	-6.3V
Nominal Gain Bandwidth Product	80MHz
Height Seated (Max)	1.752mm
RoHS Status	ROHS3 Compliant

LT1802IS#PBF Overview

Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. The input offset voltage is 350μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Operational amplifier can operate supply current at 1.8mA. There should be no change in the voltage gain at 98.59dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. 4 elements make up the design of this buffer amplifier.