LT1802IS#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Tape & Reel (TR) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.8mA |
| Slew Rate | 25 V/μs |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 400nA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 70MHz |
| Voltage Gain | 98.59dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.15V |
| Nominal Gain Bandwidth Product | 80MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1802IS#TRPBF Overview
There is a SOIC case package that contains the instrumentation amplifiers. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. 14 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 350μV. You can run this op amp ic on 1.8mA . There should be no change in the voltage gain at 98.59dB. This op amp contains 4 circuits. On the buffer amps, there are 4 channels that can be used. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. Linear amplifier shouldn't be used above 85°C degrees. It is possible to count 4 elements on this buffer amplifier. The electrical part is capable of being powered by a voltage of under 12.6V, which means that it can be used with any voltage supply. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.3V when using it. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6.3V volts.
LT1802IS#TRPBF Features
98.59dB voltage gain
LT1802IS#TRPBF Applications
There are a lot of Analog Devices, Inc. LT1802IS#TRPBF Instrumentational OP Amps applications.
- Band-pass filter
- Division circuits
- Addition operation circuits
- pH (acidity)
- Signal operation
- Inverse/same-phase proportional circuit
- Digital cameras
- Scintillation detectors
- Television
- Signal filtering
