banner_page

LT1803CS5#TRMPBF

1 Channels 50mA per Channel 2.5μA 75 dB Instrumentational OP Amps TSOT


  • Manufacturer: Analog Devices, Inc.
  • Nocochips NO: 84-LT1803CS5#TRMPBF
  • Package: TSOT
  • Datasheet: PDF
  • Stock: 417
  • Description: 1 Channels 50mA per Channel 2.5μA 75 dB Instrumentational OP Amps TSOT(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Package / Case TSOT
Number of Pins 5
Packaging Cut Tape
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Number of Elements 1
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 12.6V
Min Supply Voltage 2.3V
Operating Supply Current 2.5mA
Slew Rate 100 V/μs
Common Mode Rejection Ratio 75 dB
Current - Input Bias 2.5μA
Output Current per Channel 50mA
Input Offset Voltage (Vos) 2mV
Bandwidth 85MHz
Gain Bandwidth Product 83MHz
Voltage Gain 95.56dB
Power Supply Rejection Ratio (PSRR) 68dB
Max Dual Supply Voltage 6.3V
Min Dual Supply Voltage 1.15V
Nominal Gain Bandwidth Product 83MHz
Number of Amplifiers 1
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

LT1803CS5#TRMPBF Overview


The linear amplifier is packaged in a TSOT case. A Cut Tape case is used to deliver the buffer op amp. In total, the buffer amplifier consists of 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. It is possible to operate this buffer amplifier from a supply current of 2.5mA . It is recommended to keep the voltage gain at 95.56dB at all times. On this buffer amplifier, there are 1 circuits. Op amp ic has 1 channels. It should not lower than 0°C to operate buffer amplifier. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 70°C. 1 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 12.6V as far as supply voltage is concerned. It is advised to keep the op amp's supply voltage higher than 2.3V. As a general rule, you should conduct this electronic component under dual supply voltages of 6.3V volts. The buffer amplifier consists of 1 amplifiers.

LT1803CS5#TRMPBF Features


95.56dB voltage gain

LT1803CS5#TRMPBF Applications


There are a lot of Analog Devices, Inc. LT1803CS5#TRMPBF Instrumentational OP Amps applications.

  • Subtraction operation circuits
  • Portable docking station
  • pH (acidity)
  • Image computer boards
  • Automation control systems
  • earphone
  • Signal operation
  • Test equipment
  • Hand-held batteries
  • Signal filtering

Write a review

Note: HTML is not translated!
    Bad           Good