LT1803IS8#PBF
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 2.3V~12.6V ±1.15V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 75000 kHz |
| Voltage Gain | 95.56dB |
| Average Bias Current-Max (IIB) | 6.5μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 83MHz |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1803 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.5mA |
| Slew Rate | 88V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2.5μA |
LT1803IS8#PBF Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 2mV voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 2.5mA . There should be no change in the voltage gain. This op amp contains 1 circuits. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. It is possible to count 1 elements on this buffer amplifier.
LT1803IS8#PBF Features
8 Pins
supply voltage of 5V
95.56dB voltage gain
Output Type: Rail-to-Rail
LT1803IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1803IS8#PBF Instrumentational OP Amps applications.
- Industrial applications including automation
- Tablets
- Radiation thermometry transducers
- High speed sample
- Division circuits
- Laptop
- Exponential operation circuits
- Test equipment
- Digital cameras
- Proportional operation circuits
