LT1804CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 6.3V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 2.5mA |
| Max Supply Current | 6mA |
| Slew Rate | 100 V/μs |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 5.5μA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 83MHz |
| Gain Bandwidth Product | 83MHz |
| Voltage Gain | 95.56dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.15V |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 83MHz |
| Number of Amplifiers | 2 |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1804CS8#PBF Overview
There is a SOIC case in which the instrumentation amplifier is packaged. 8 pins are located on the operational amplifiers. The input offset voltage is 2mV. This op amp can operate from a supply current at 2.5mA. It is a member of the 95.56dB's 95.56dB family. A linear amplifier like this has 2 circuits on it. There are a total of 2 channels available on the op amps. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. It is recommended that op amp be used at temperatures below 70°C. Op amp has total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 6.3V voltage. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 12.6V. A high supply voltage of more than 2.3V is recommended for the instrumentation amplifier's supply voltage. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts. There are 2 amplifiers on it.
LT1804CS8#PBF Features
95.56dB voltage gain
LT1804CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1804CS8#PBF Instrumentational OP Amps applications.
- Fission chambers
- Precision measurement
- RF cable systems
- Commercial audio systems
- Portable docking station
- Signal operation
- Voltage regulation circuit
- ECG equipment
- High-frequency data acquisition systems
- High gain DC amplifier
