LT1804IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1804 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 2.5mA |
| Slew Rate | 88V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 2.3V~12.6V ±1.15V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 85MHz |
| Gain Bandwidth Product | 83MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 75000 kHz |
| Voltage Gain | 95.56dB |
| Average Bias Current-Max (IIB) | 6.5μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1.5mV |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1804IDD#PBF Overview
The linear amplifier is packaged in a 8-WFDFN Exposed Pad case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. In recent months, the number of terminations has approached 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Operational amplifier can operate supply current at 2.5mA. It is recommended to keep the voltage gain at 95.56dB at all times. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier.
LT1804IDD#PBF Features
8 Pins
supply voltage of 5V
95.56dB voltage gain
Output Type: Rail-to-Rail
LT1804IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1804IDD#PBF Instrumentational OP Amps applications.
- Television
- Micro signal measurement
- Image computer boards
- RF cable systems
- Medical instruments
- earphone
- Tablets
- Weak signal detection
- Automatic control
- Subtraction operation circuits
