LT1805CS#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 6.3V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 2.5mA |
| Slew Rate | 100 V/μs |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2.5μA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 85MHz |
| Gain Bandwidth Product | 83MHz |
| Voltage Gain | 95.56dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.15V |
| Nominal Gain Bandwidth Product | 85MHz |
| Number of Amplifiers | 4 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1805CS#PBF Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. 14 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 2mV. Using an 2.5mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 95.56dB. The buffer amp consists of 4 circuits in total. Op amp ic has 4 channels. For this linear amplifier to work, the temperature should not be below 0°C. No temperature greater than 70°C should be used. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 6.3V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.3V. As a general rule, you should conduct this electronic component under dual supply voltages of 6.3V volts. In total, there are 4 op amps on the device.
LT1805CS#PBF Features
95.56dB voltage gain
LT1805CS#PBF Applications
There are a lot of Analog Devices, Inc. LT1805CS#PBF Instrumentational OP Amps applications.
- Television
- Oscilloscopes
- Navigation
- Signal operation
- Precision measurement
- Automation control systems
- Ultrasound transducers
- Comparator
- Addition operation circuits
- Tablets
