LT1806IS8#PBF
| Parameters | |
|---|---|
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1806 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 11mA |
| Max Supply Current | 13mA |
| Slew Rate | 140V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 79 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 550μV |
| Bandwidth | 325MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 290000 kHz |
| Voltage Gain | 106.85dB |
| Average Bias Current-Max (IIB) | 7μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 325MHz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
LT1806IS8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 8-pin op amp ic is included in the package. Op amp ic rates 550μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 11mA. 106.85dB should be the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 3V.
LT1806IS8#PBF Features
8 Pins
supply voltage of 5V
106.85dB voltage gain
Output Type: Rail-to-Rail
LT1806IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1806IS8#PBF Instrumentational OP Amps applications.
- Laptop
- Hand-held batteries
- single/dual op amp sum and difference circuits
- Instrumentation
- Proportional counter tubes
- Thermocouples
- Strain gauges
- Voltage regulation circuit
- High/low-pass filter circuit
- Power control
