LT1807IS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 11mA |
| Slew Rate | 125 V/μs |
| Common Mode Rejection Ratio | 79 dB |
| Current - Input Bias | 5μA |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 550μV |
| Bandwidth | 325MHz |
| Gain Bandwidth Product | 325MHz |
| Voltage Gain | 106.85dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.25V |
| Nominal Gain Bandwidth Product | 325MHz |
| Number of Amplifiers | 2 |
| Height | 1.498mm |
| Length | 5mm |
| Width | 3.988mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1807IS8#PBF Overview
Packaging for the buffer amplifier is in the form of a SOIC case. An 8-pin op amp ic is included in the package. There is an input offset voltage of 550μV for this buffer op amp. As long as the supply current of the chip does not exceed 11mA, this op amp ic can operate. Voltage gain should remain at 106.85dB. There are 2 circuits on op amps. On the buffer amps, there are 2 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. No temperature greater than 85°C should be used. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 5V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5V when using it. As a general rule, you should conduct this electronic component under dual supply voltages of 6.3V volts. There are 2 amplifiers on it.
LT1807IS8#PBF Features
106.85dB voltage gain
LT1807IS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1807IS8#PBF Instrumentational OP Amps applications.
- Active probe
- Video amplifiers
- Signal filtering
- Test and measurement instruments
- Signal transformation
- Broadcasting
- High gain DC amplifier
- Voltage regulation circuit
- Communication device
- Semiconductor detectors
