LT1809CS6#TRMPBF
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 15mA |
| Slew Rate | 300 V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 12.5μA |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 170000 kHz |
| Voltage Gain | 98.06dB |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Max Dual Supply Voltage | 6.3V |
| -3db Bandwidth | 320MHz |
| Min Dual Supply Voltage | 1.25V |
| Nominal Gain Bandwidth Product | 160MHz |
| Length | 2.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Packaging | Cut Tape |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 6 |
| Terminal Finish | MATTE TIN |
LT1809CS6#TRMPBF Overview
In the package, you will find a SOT-23-6-case to contain the op amp ic. An op amp ic of the OPERATIONAL AMPLIFIER type. There is a Cut Tape case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 6. It consists of a total of 6 pins in total. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 6 pins on this chip. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. You can run this op amp ic on 15mA . Maintain 98.06dB as the voltage gain. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. At temperatures greater than 70°C, op amp should not be used. A voltage rating of 1 is indicated for the op amp's operating supply voltage. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 12.6V. A voltage of 2.5V or higher is recommended for the linear amplifier's supply voltage. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts.
LT1809CS6#TRMPBF Features
6 Pins
supply voltage of 5V
98.06dB voltage gain
LT1809CS6#TRMPBF Applications
There are a lot of Analog Devices, Inc. LT1809CS6#TRMPBF Instrumentational OP Amps applications.
- Commercial audio systems
- Portable docking station
- Fission chambers
- Video amplifiers
- Proportional operation circuits
- Cinema or auditorium audio system
- Mobile phone
- Television broadcasting equipment
- Voltage regulation circuit
- Inverse/same-phase proportional circuit
