LT1809CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1809 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 15mA |
| Supply Current-Max | 25mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 12.5μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 170000 kHz |
| Voltage Gain | 98.06dB |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 800μV |
| Low-Bias | NO |
| -3db Bandwidth | 320MHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 160MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1809CS6#TRMPBF Overview
There is a SOT-23-6 Thin, TSOT-23-6 case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Cut Tape (CT) case. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are located on this board. Please take in mind that op amp should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 6 pins on it. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . A supply current of 15mA can be used to operate this linear amplifier. Voltage gain should remain at 98.06dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There are 1 elements in total in this linear amplifier. This linear amplifier pack is based on the TAPE AND REEL axis.
LT1809CS6#TRMPBF Features
6 Pins
supply voltage of 5V
98.06dB voltage gain
Output Type: Rail-to-Rail
LT1809CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1809CS6#TRMPBF Instrumentational OP Amps applications.
- Power transmission
- Logarithmic operation circuits
- Weighing systems
- Ultrasound transducers
- Signal transformation
- High/low-pass filter circuit
- Fast A/D and D/A converters
- High-frequency data acquisition systems
- Communication
- Cinema or auditorium audio system
