LT1809IS8#PBF
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1809 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 15mA |
| Supply Current-Max | 25mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 12.5μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 160000 kHz |
| Voltage Gain | 98.06dB |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 800μV |
| Low-Bias | NO |
| -3db Bandwidth | 320MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 160MHz |
| Wideband | YES |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
LT1809IS8#PBF Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 2.5mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . This op amp can operate from a supply current at 15mA. Op amp is a member of the 98.06dB's 98.06dB family. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There is a rating of 1 for the operating supply voltage of the buffer op amp.
LT1809IS8#PBF Features
8 Pins
supply voltage of 5V
98.06dB voltage gain
Output Type: Rail-to-Rail
LT1809IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1809IS8#PBF Instrumentational OP Amps applications.
- Scintillation detectors
- Proportional counter tubes
- Professional videography
- Power generator
- Fast A/D and D/A converters
- Television
- Power control
- Video amplifiers
- Image computer boards
- Automation control systems
