LT1810CMS8#TRPBF

2 Channels 85mA per Channel 12.5μA 66 dB Instrumentational OP Amps MSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1810CMS8#TRPBF
Package: MSOP
Datasheet: PDF
Stock: 515
Description: 2 Channels 85mA per Channel 12.5μA 66 dB Instrumentational OP Amps MSOP(Kg)

Details

Tags

Parameters
Nominal Gain Bandwidth Product	160MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	MSOP
Number of Pins	8
Packaging	Tape & Reel (TR)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	12.6V
Min Supply Voltage	2.3V
Operating Supply Current	15mA
Slew Rate	300 V/μs
Common Mode Rejection Ratio	66 dB
Current - Input Bias	12.5μA
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2.5mV
Gain Bandwidth Product	160MHz
Voltage Gain	98.06dB
Power Supply Rejection Ratio (PSRR)	71dB
Max Dual Supply Voltage	6.3V
-3db Bandwidth	320MHz
Min Dual Supply Voltage	1.25V

LT1810CMS8#TRPBF Overview

The linear amplifier is packaged in a MSOP case. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. An 8-pin op amp ic is included in the package. Op amp ic rates 2.5mV for input offset voltage. As long as the supply current of the chip does not exceed 15mA, this op amp ic can operate. There should be no change in the voltage gain at 98.06dB. There are 2 circuits on this op amp. The op amp ic has 2 channels on it. For this linear amplifier to work, the temperature should not be below 0°C. You should not use op amp above 70°C . There are 2 elements in this buffer amplifier. The electrical part is capable of being powered by a voltage of under 12.6V, which means that it can be used with any voltage supply. It is advised to keep the op amp's supply voltage higher than 2.3V. The dual supply voltage of 6.3V should be used for the conduct of this electronic component.