LT1810IS8#PBF
| Parameters | |
|---|---|
| Wideband | YES |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1810 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 15mA |
| Max Supply Current | 34mA |
| Slew Rate | 350V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 12.5μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 160000 kHz |
| Voltage Gain | 98.06dB |
| Average Bias Current-Max (IIB) | 14μA |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 800μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 320MHz |
| Bias Current-Max (IIB) @25C | 10μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 160MHz |
LT1810IS8#PBF Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using an 15mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 98.06dB at all times. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. This linear amplifier has a total of 2 elements. The operating supply voltage of the buffer op amp is rated at 3V.
LT1810IS8#PBF Features
8 Pins
supply voltage of 5V
98.06dB voltage gain
Output Type: Rail-to-Rail
LT1810IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1810IS8#PBF Instrumentational OP Amps applications.
- Car stereo
- Exponential operation circuits
- Portable docking station
- Industrial applications including automation
- Signal transformation
- Portable media players
- MP3
- Industrial control system
- Micro signal measurement
- Proportional operation circuits
