LT1812CS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1812 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 3mA |
| Supply Current-Max | 4.6mA |
| Slew Rate | 750V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 900nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 66.02dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 400μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1812CS5#TRMPBF Overview
Op amp is packaged in SOT-23-5 Thin, TSOT-23-5 case. There are two types of operational amplifiers in this circuit. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 5 pins. In terms of input offset voltage, operational amplifier rates 1.5mV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 3mA . Voltage gain should remain at 66.02dB. This op amp contains 1 circuits. There are a total of 1 elements in this linear amplifier. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LT1812CS5#TRMPBF Features
5 Pins
supply voltage of 5V
66.02dB voltage gain
LT1812CS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1812CS5#TRMPBF Instrumentational OP Amps applications.
- Mobile phone
- Fission chambers
- Micro signal measurement
- High input resistance broadband
- Automatic control
- Hand-held batteries
- High/low-pass filter circuit
- Digital cameras
- Semiconductor detectors
- Signal transformation
