LT1813DMS8#PBF
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 6.3V |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Supply Current-Max | 10mA |
| Slew Rate | 750V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 900nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 66.02dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 200MHz |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 100MHz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1813 |
| Pin Count | 8 |
LT1813DMS8#PBF Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. An op amp of this type is a Voltage Feedback-type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 1.5mV as input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. The buffer amplifier is capable of operating from a supply current of 3mA . It is recommended to keep the voltage gain at 66.02dB at all times. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 6.3V.
LT1813DMS8#PBF Features
8 Pins
supply voltage of 5V
66.02dB voltage gain
LT1813DMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1813DMS8#PBF Instrumentational OP Amps applications.
- Signal transformation
- Image computer boards
- High input resistance broadband
- Addition operation circuits
- Hand-held batteries
- Broadcasting
- Micro signal measurement
- Automatic control
- Multimedia playback equipment
- Medical imaging
