LT1814CGN#TRPBF

4 Channels 60mA per Channel 900nA 73 dB Instrumentational OP Amps SSOP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1814CGN#TRPBF
Package: SSOP
Datasheet: PDF
Stock: 855
Description: 4 Channels 60mA per Channel 900nA 73 dB Instrumentational OP Amps SSOP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	SSOP
Number of Pins	16
Packaging	Tape & Reel (TR)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	4
Number of Channels	4
Number of Circuits	4
Max Supply Voltage	12.5V
Min Supply Voltage	2.5V
Operating Supply Current	3mA
Slew Rate	750 V/μs
Common Mode Rejection Ratio	73 dB
Current - Input Bias	900nA
Output Current per Channel	60mA
Input Offset Voltage (Vos)	1.5mV
Gain Bandwidth Product	94MHz
Voltage Gain	66.02dB
Power Supply Rejection Ratio (PSRR)	78dB
Max Dual Supply Voltage	6.3V
-3db Bandwidth	200MHz
Min Dual Supply Voltage	2V
Nominal Gain Bandwidth Product	100MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT1814CGN#TRPBF Overview

In order to protect the op amps, a SSOP case is used. The op amp is delivered to you in a Tape & Reel (TR) case. It has 16 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. As long as the supply current of the chip does not exceed 3mA, this op amp ic can operate. There should be no change in the voltage gain at 66.02dB. There are 4 circuits on op amps. The op amp ic has 4 channels on it. It is recommended that the temperature of this op amp ic should not fall below 0°C degrees Fahrenheit at any time. You should not use op amp above 70°C . Op amp has total of 4 elements. Under 12.5V is the minimum supply voltage for this electric component. A voltage of 2.5V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 6.3V volts when you conduct this part.