LT1814CS#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12.5V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 3mA |
| Slew Rate | 750 V/μs |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 900nA |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 100MHz |
| Gain Bandwidth Product | 94MHz |
| Voltage Gain | 66.02dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Dual Supply Voltage | 6.3V |
| -3db Bandwidth | 200MHz |
| Min Dual Supply Voltage | 2V |
| Nominal Gain Bandwidth Product | 100MHz |
| Number of Amplifiers | 4 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1814CS#PBF Overview
The linear amplifier is packaged in a SOIC case. A total of 14 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. In order for this instrumentation amplifier to operate, the supply current needs to be between 3mA and 10 . The voltage gain should stay at 66.02dB. During the manufacturing process, this buffer amplifier is divided into 4 circuits. Buffer op amp is equipped with 4 channels on the device. The temperature should not be lower than 0°C for operational amplifier ics to operate. At temperatures greater than 85°C, op amp should not be used. The total number of elements in this buffer amplifier is 4. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.5V. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.5V, it is recommended to keep it higher. There should be a dual supply voltage of 6.3V for you to conduct this electrical part. The linear amplifier has 4 amplifiers.
LT1814CS#PBF Features
66.02dB voltage gain
LT1814CS#PBF Applications
There are a lot of Analog Devices, Inc. LT1814CS#PBF Instrumentational OP Amps applications.
- Power generator
- Weighing systems
- ECG equipment
- High/low-pass filter circuit
- Micro signal measurement
- Automation control systems
- Information processing
- Proportional counter tubes
- Communication device
- Signal filtering
