LT1814IGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1814 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 4 |
| Number of Circuits | 4 |
| Operating Supply Current | 3mA |
| Supply Current-Max | 22mA |
| Slew Rate | 750V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 900nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 66.02dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 200MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 100MHz |
| Wideband | YES |
| Height Seated (Max) | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1814IGN#PBF Overview
The linear amplifier is packaged in a 16-SSOP (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Voltage Feedback types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 16 mark. There are a total of 16 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 16 pins are available on the instrumentation amplifier. The input offset voltage is 1.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 3mA . 66.02dB should be the voltage gain. A instrumentation amplifier like this has 4 circuits. 4 elements make up the design of this buffer amplifier.
LT1814IGN#PBF Features
16 Pins
supply voltage of 5V
66.02dB voltage gain
LT1814IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1814IGN#PBF Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Vehicle electronics
- Information processing
- Differentiator circuits
- Band-stop filter
- Weak signal detection
- Television
- Industrial applications including automation
- PDA
- Communication
