LT1815CS5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1815 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 6.5mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 220000 kHz |
| Voltage Gain | 66.02dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Bias Current-Max (IIB) @25C | 8μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 220MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1815CS5#TRMPBF Overview
Packaged in a SOT-23-5 Thin, TSOT-23-5 case, the buffer op amp is ready to use. This is a Voltage Feedback type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 5-pin op amp ic is included in the package. There is an input offset voltage of 1.5mV for this buffer op amp. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . This op amp can operate from a supply current at 6.5mA. 66.02dB should be the voltage gain. A instrumentation amplifier like this has 1 circuits. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. It is used TAPE AND REEL to pack the op amps.
LT1815CS5#TRMPBF Features
5 Pins
supply voltage of 5V
66.02dB voltage gain
LT1815CS5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1815CS5#TRMPBF Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Biopotential
- Test equipment
- Automatic control
- Communication
- Displayers for aircraft and air transportation control systems
- Fission chambers
- Inverse/same-phase proportional circuit
- Digital cameras
- RF cable systems
