LT1815CS6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1815 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 6.5mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 220000 kHz |
| Voltage Gain | 66.02dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Bias Current-Max (IIB) @25C | 8μA |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 220MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1815CS6#TRMPBF Overview
There is a SOT-23-6 Thin, TSOT-23-6 case package that contains the instrumentation amplifiers. Voltage Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 6 terminations over the past year. There are a total of 6 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 6 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. You can run this op amp ic on 6.5mA . 66.02dB should remain the voltage gain. A linear amplifier like this has 1 circuits on it. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
LT1815CS6#TRMPBF Features
6 Pins
supply voltage of 5V
66.02dB voltage gain
LT1815CS6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT1815CS6#TRMPBF Instrumentational OP Amps applications.
- Weak signal detection
- Blood pressure sensors
- Logarithmic operation circuits
- Professional videography
- Semiconductor detectors
- Proportional operation circuits
- Industrial control system
- Test equipment
- Mobile phone
- single/dual op amp sum and difference circuits
