banner_page

LT1815IS6#TRMPBF

1 Channels 80mA per Channel 2μA 73 dB Instrumentational OP Amps SOT-23-6


  • Manufacturer: Analog Devices, Inc.
  • Nocochips NO: 84-LT1815IS6#TRMPBF
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 768
  • Description: 1 Channels 80mA per Channel 2μA 73 dB Instrumentational OP Amps SOT-23-6(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Package / Case SOT-23-6
Number of Pins 6
Packaging Tape & Reel (TR)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Number of Elements 1
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 12.6V
Min Supply Voltage 4V
Operating Supply Current 6.5mA
Slew Rate 1500 V/μs
Common Mode Rejection Ratio 73 dB
Current - Input Bias 2μA
Output Current per Channel 80mA
Input Offset Voltage (Vos) 1.5mV
Gain Bandwidth Product 200MHz
Voltage Gain 66.02dB
Power Supply Rejection Ratio (PSRR) 78dB
Max Dual Supply Voltage 6.3V
-3db Bandwidth 350MHz
Min Dual Supply Voltage 2V
Nominal Gain Bandwidth Product 220MHz
RoHS Status RoHS Compliant
Lead Free Lead Free

LT1815IS6#TRMPBF Overview


Op amp is packaged in SOT-23-6 case. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There are 6 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. The buffer amplifier is capable of operating from a supply current of 6.5mA . 66.02dB should remain the voltage gain. This op amp contains 1 circuits. Buffer op amp is equipped with 1 channels on the device. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. I would like to point out that this electrical component is capable of working from a voltage below 12.6V as far as the power supply is concerned. Keeping the linear amplifier's supply voltage above 4V is recommended. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6.3V volts.

LT1815IS6#TRMPBF Features


66.02dB voltage gain

LT1815IS6#TRMPBF Applications


There are a lot of Analog Devices, Inc. LT1815IS6#TRMPBF Instrumentational OP Amps applications.

  • Precision measurement
  • E-book readers
  • Gaming industry
  • Comparator
  • Signal amplification
  • Weak signal detection
  • Subtraction operation circuits
  • Exponential operation circuits
  • Band-pass filter
  • Information processing

Write a review

Note: HTML is not translated!
    Bad           Good