LT1816CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1816 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Power Supplies | 5/+-5V |
| Number of Circuits | 2 |
| Operating Supply Current | 6.5mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 220000 kHz |
| Voltage Gain | 66.02dB |
| Average Bias Current-Max (IIB) | 10μA |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 220MHz |
| Wideband | YES |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1816CS8#PBF Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. The input offset voltage is 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . Using a supply current of 6.5mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. In total, there are 2 circuits on this buffer amplifier. A total of 2 elements are present in this linear amplifier.
LT1816CS8#PBF Features
8 Pins
supply voltage of 5V
66.02dB voltage gain
LT1816CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1816CS8#PBF Instrumentational OP Amps applications.
- Exponential operation circuits
- Portable media players
- Oscilloscopes
- Large motor controllers
- High input resistance broadband
- Signal filtering
- High-frequency data acquisition systems
- Video conversion and routing
- Weak signal detection
- Power generator
