LT1816IDD#PBF
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1816 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/+-5V |
| Number of Circuits | 2 |
| Operating Supply Current | 6.5mA |
| Slew Rate | 1500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 220MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 220000 kHz |
| Voltage Gain | 66.02dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 350MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Wideband | YES |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
LT1816IDD#PBF Overview
Packaged in a 8-WFDFN Exposed Pad case, the buffer op amp is ready to use. Voltage Feedback-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 200μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . This op amp can operate from a supply current at 6.5mA. There should be no change in the voltage gain at 66.02dB. There are 2 circuits on this op amp.
LT1816IDD#PBF Features
8 Pins
supply voltage of 5V
66.02dB voltage gain
LT1816IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1816IDD#PBF Instrumentational OP Amps applications.
- Automation control systems
- Signal transformation
- Semiconductor detectors
- Medical instruments
- Subtraction operation circuits
- Power control
- Multimedia playback equipment
- Test and measurement instruments
- High speed sample
- Medical imaging
