LT1818CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 12V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 3.5V |
| Operating Supply Current | 9mA |
| Slew Rate | 2500 V/μs |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 8μA |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 400MHz |
| Gain Bandwidth Product | 360MHz |
| Voltage Gain | 72.04dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.75V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 400MHz |
| Number of Amplifiers | 1 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1818CS8#PBF Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. It is possible to operate this buffer amplifier from a supply current of 9mA . It is recommended to keep the voltage gain at 72.04dB at all times. On this buffer amplifier, there are 1 circuits. Op amp ic has 1 channels. It is recommended that the temperature of this op amp ic should not fall below 0°C degrees Fahrenheit at any time. It is recommended that op amp be used at temperatures below 70°C. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 12V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. The linear amplifier's supply voltage should be higher than 3.5V. Conduct linear amplifier under the dual suuply voltage of 6.3V. A total of 1 instrumentation amplifiers are present on the device.
LT1818CS8#PBF Features
72.04dB voltage gain
LT1818CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1818CS8#PBF Instrumentational OP Amps applications.
- Precision measurement
- Scintillation detectors
- Proportional operation circuits
- Band-stop filter
- Thermocouples
- Power generator
- Fission chambers
- Test and measurement instruments
- Polarized electrodes
- Power control
