LT1818IS8#PBF
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1818 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Number of Circuits | 1 |
| Operating Supply Current | 9mA |
| Slew Rate | 2500V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 73 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 400000 kHz |
| Voltage Gain | 72.04dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Nominal Gain Bandwidth Product | 400MHz |
| Wideband | YES |
| Length | 4.9025mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
LT1818IS8#PBF Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are included on the operational amplifiers. Op amp rates 1.5mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 9mA, this op amp ic can operate. Keeping the voltage gain at 72.04dB is the best course of action. A instrumentation amplifier like this has 1 circuits. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1.
LT1818IS8#PBF Features
8 Pins
supply voltage of 5V
72.04dB voltage gain
LT1818IS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1818IS8#PBF Instrumentational OP Amps applications.
- Professional videography
- Non-polarized electrodes
- Signal transformation
- Comparator
- Cinema or auditorium audio system
- Large motor controllers
- Video data acquisition
- Fast A/D and D/A converters
- Wireless base stations
- Computer workstations
