banner_page

LT1819CMS8#PBF

70mA per Channel 2μA 73 dB Instrumentational OP Amps 10μA 2.5V~12.6V ±1.25V~6.3V LT1819 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Linear Technology/Analog Devices
  • Nocochips NO: 471-LT1819CMS8#PBF
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 282
  • Description: 70mA per Channel 2μA 73 dB Instrumentational OP Amps 10μA 2.5V~12.6V ±1.25V~6.3V LT1819 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2010
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number LT1819
Pin Count 8
Qualification Status Not Qualified
Number of Elements 2
Power Supplies 5/+-5V
Operating Supply Current 9mA
Slew Rate 2500V/μs
Amplifier Type Voltage Feedback
Common Mode Rejection Ratio 73 dB
Current - Input Bias 2μA
Voltage - Supply, Single/Dual (±) 2.5V~12.6V ±1.25V~6.3V
Output Current per Channel 70mA
Input Offset Voltage (Vos) 1.5mV
Bandwidth 400MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 400000 kHz
Voltage Gain 72.04dB
Average Bias Current-Max (IIB) 10μA
Power Supply Rejection Ratio (PSRR) 78dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 6.3V
Voltage - Input Offset 200μV
Low-Bias NO
Micropower NO
Programmable Power NO
Neg Supply Voltage-Max (Vsup) -6.3V
Nominal Gain Bandwidth Product 400MHz
Height Seated (Max) 1.1mm
Length 3mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LT1819CMS8#PBF Overview


A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. An op amp ic of the Voltage Feedback type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 9mA and 10 . There should be no change in the voltage gain. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply.

LT1819CMS8#PBF Features


8 Pins
supply voltage of 5V
72.04dB voltage gain

LT1819CMS8#PBF Applications


There are a lot of Linear Technology/Analog Devices LT1819CMS8#PBF Instrumentational OP Amps applications.

  • Differentiator circuits
  • Band-stop filter
  • Communication device
  • PDA
  • earphone
  • E-book readers
  • Fast A/D and D/A converters
  • Navigation
  • Blood pressure sensors
  • Commercial audio systems

Write a review

Note: HTML is not translated!
    Bad           Good