LT1880CS5#TRMPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | TSOT |
| Number of Pins | 5 |
| Packaging | Cut Tape |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 1.5mA |
| Slew Rate | 0.55 V/μs |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 150pA |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 1.1MHz |
| Gain Bandwidth Product | 1.1MHz |
| Voltage Gain | 124.08dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Number of Amplifiers | 1 |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1880CS5#TRMPBF Overview
There is a TSOT case package that contains the instrumentation amplifiers. A Cut Tape case is used for delivering the op amp. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 150μV for input offset voltage. Using an 1.5mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 124.08dB is the best course of action. There are 1 circuits on op amps. Instrumentation amplifier has 1 channels on it. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. At temperatures greater than 70°C, op amp should not be used. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 28V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 40V. The linear amplifier's supply voltage should be higher than 2.4V. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The linear amplifier has 1 amplifiers.
LT1880CS5#TRMPBF Features
124.08dB voltage gain
LT1880CS5#TRMPBF Applications
There are a lot of Analog Devices, Inc. LT1880CS5#TRMPBF Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Automation control systems
- Large motor controllers
- Medical instruments
- Portable electronic products powered by batteries
- Hand-held batteries
- Fission chambers
- Television broadcasting equipment
- Video conversion and routing
- earphone
