LT1881IN8#PBF

2 Channels 40mA per Channel 150pA 106 dB Instrumentational OP Amps DIP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1881IN8#PBF
Package: DIP
Datasheet: PDF
Stock: 435
Description: 2 Channels 40mA per Channel 150pA 106 dB Instrumentational OP Amps DIP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Package / Case	DIP
Number of Pins	8
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Number of Elements	2
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	40V
Min Supply Voltage	2.4V
Operating Supply Current	850μA
Slew Rate	0.35 V/μs
Common Mode Rejection Ratio	106 dB
Current - Input Bias	150pA
Output Current per Channel	40mA
Input Offset Voltage (Vos)	50μV
Gain Bandwidth Product	1MHz
Voltage Gain	124.08dB
Power Supply Rejection Ratio (PSRR)	106dB
Max Dual Supply Voltage	18V
Min Dual Supply Voltage	1.35V
Nominal Gain Bandwidth Product	1MHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT1881IN8#PBF Overview

There is a DIP case in which the instrumentation amplifier is packaged. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. It is possible to operate this buffer amplifier from a supply current of 850μA . 124.08dB should be the voltage gain. There are 2 circuits on this op amp. Buffer op amp is equipped with 2 channels on the device. To operate this buffer amplifier, the temperature must not be lower than -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. A voltage rating of 2 is indicated for the op amp's operating supply voltage. It is important to keep in mind that the power supply voltage of this electric component is below 40V, which is suitable. Keeping the linear amplifier's supply voltage above 2.4V is recommended. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts.