LT1884AIN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1884 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 5/+-15V |
| Operating Supply Current | 850μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 108 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 2.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2200 kHz |
| Voltage Gain | 124.08dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 25μV |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Nominal Gain Bandwidth Product | 2MHz |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1884AIN8#PBF Overview
Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 50μV. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 850μA. There should be no change in the voltage gain at 124.08dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For the operating supply voltage of the op amp ic, there is a rating of 2.
LT1884AIN8#PBF Features
8 Pins
supply voltage of 15V
124.08dB voltage gain
Output Type: Rail-to-Rail
LT1884AIN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1884AIN8#PBF Instrumentational OP Amps applications.
- Polarized electrodes
- Industrial control system
- Professional videography
- Weighing systems
- Television
- Car stereo
- Video amplifiers
- Thermocouples
- Broadcasting
- Medical imaging
