LT1884CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 28V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 850μA |
| Max Supply Current | 1.8mA |
| Slew Rate | 0.9 V/μs |
| Common Mode Rejection Ratio | 108 dB |
| Current - Input Bias | 150pA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
| Voltage Gain | 124.08dB |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 2MHz |
| Number of Amplifiers | 2 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1884CS8#PBF Overview
Op amp is packaged in SOIC case. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 50μV. Using a supply current of 850μA , this buffer op amp will be able to operate. 124.08dB should be the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. 2 channels are available on the instrumentation amplifier. To operate this buffer amplifier, the temperature must not be lower than -40°C. Use op amp only at temperatures no higher than 85°C. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 28V. The electrical part is capable of being powered by a voltage of under 40V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.4V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. On the linear amplifier, there are 2 amplifiers.
LT1884CS8#PBF Features
124.08dB voltage gain
LT1884CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1884CS8#PBF Instrumentational OP Amps applications.
- Power generator
- Image computer boards
- Video computer boards
- Ultrasound transducers
- Strain gauges
- Communication
- Portable media players
- RF cable systems
- Switching amplifier
- Integrator circuits
