LT1913IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1913 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 91 % |
| Output Voltage | 25V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3.6V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 3.5A |
| Max Output Voltage | 24.25V |
| Voltage - Output (Min/Fixed) | 0.79V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 230kHz~2.45MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 790mV |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1913IDD#PBF Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 10 terminations. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. The harley voltage regulator is available as a 10-WFDFN Exposed Pad package to save space. DC DC switching regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mounting is compatible with this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. DC-DC switching regulators reach 230kHz~2.45MHz switching frequencies. A dc to dc voltage regulator's minimum input voltage of 3.6V is required for this voltage regulator to operate. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.79V. Featuring a maximum design flexibility of 3.5A, dc to dc voltage regulator has a maximum output current of 3.5A. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the switching regulator operation requirements, a nominal input voltage of 10V is provided. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. As a member of the LT1913 family of DC/DC regulators, this is a DC/DC regulator. The adjusting voltage regulator's output voltage is maintain at 25V. The switching regulator operation of the system is controlled by 10 pins. There should be at least a 790mV volt output voltage for this switching regulator in order to make it work properly. DC DC switching regulator offers a maximum output voltage of 24.25V as its maximum output voltage.
LT1913IDD#PBF Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LT1913IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1913IDD#PBF Voltage Regulators applications.
- Product burn-in
- Driver circuits
- Energy management systems
- Mobile phones
- Surface processing equipment
- Scientific research
- Alternators
- Power supplies of electronic gadgets
- Die casting equipment
- Combined machine tools
