LT1920CN8#PBF

1 Channels 27mA per Channel 500pA 75 dB Instrumentational OP Amps DIP

Manufacturer: Analog Devices, Inc.
Nocochips NO: 84-LT1920CN8#PBF
Package: DIP
Datasheet: PDF
Stock: 832
Description: 1 Channels 27mA per Channel 500pA 75 dB Instrumentational OP Amps DIP(Kg)

Details

Tags

Parameters
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Package / Case	DIP
Number of Pins	8
Resistance	200GOhm
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Number of Elements	3
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	40V
Min Supply Voltage	4.6V
Operating Supply Current	900μA
Slew Rate	1.2 V/μs
Common Mode Rejection Ratio	75 dB
Current - Input Bias	500pA
Output Current per Channel	27mA
Input Offset Voltage (Vos)	125μV
Bandwidth	1MHz
Gain Bandwidth Product	1MHz
Power Supply Rejection Ratio (PSRR)	80dB
Max Dual Supply Voltage	18V
Min Dual Supply Voltage	2.3V
Nominal Gain Bandwidth Product	800 kHz
RoHS Status	RoHS Compliant
Lead Free	Lead Free

LT1920CN8#PBF Overview

There is a DIP case in which the instrumentation amplifier is packaged. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 125μV. You can run this op amp ic on 900μA . There are 1 circuits on this op amp. There are 1 channels on the operational amplifiers. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. Instrumentation amplifier shouldn't be used above 70°C . There are 3 elements in this buffer amplifier. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 40V. A high supply voltage of more than 4.6V is recommended for the instrumentation amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part. It is recommended to keep the instrumentation amplifier resistance within the range of 200GOhm.