LT1950IGN#PBF
| Parameters | |
|---|---|
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 3V~25V |
| Quiescent Current | 2.3mA |
| Control Features | Enable, Frequency Control |
| Topology | Boost, Flyback, Forward Converter, SEPIC |
| Frequency - Switching | 100kHz~500kHz |
| Rise Time | 50ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 30 ns |
| Max Frequency | 560kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | Yes |
| Switching Current | 10A |
| Output Phases | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SSOP |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 560kHz |
| Base Part Number | LT1950 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 2.575V |
| Output Type | Transistor Driver |
| Number of Channels | 1 |
| Max Supply Voltage | 25V |
| Output Configuration | Positive, Isolation Capable |
LT1950IGN#PBF Overview
As a result of 16-SSOP (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. dc controls with 3V~25V voltage are supplied and operated. Worked in an dc switcher with a -40°C~125°C TJ rating. There is a switch at 100kHz~500kHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control. Other relevant dc to dc converter ics will be returned if you search "LT1950". 16 pins are on switching converter. Test statistics indicate DC regulator outputs 2.575V voltage. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. DC regulator has a maximum frequency of 560kHz. The switching controller works at a frequency of 560kHz. DC regulator should be kept at a temperature of -40°C or higher. At125°C, dc regulator should run. As long as the dc switching is in a dormant state, it utilizes 2.3mA. There is 16-SSOP dc dc controller package associated with this part. Communication with high quality requires 1 channels. As far as maximum supply voltage is concerned, switching voltage regulators is rated as 25V.
LT1950IGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
Frequency: 560kHz
LT1950IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1950IGN#PBF DC to DC converter applications.
- Magnetohydrodynamic power
- Scientific testing
- Production lines
- ATMs
- Radio equipment
- Surface processing equipment
- Pipe bending machines
- Direct power supply system
- Network technology
- Automatic testing equipment
